
www.BestLubeUSA
.com
Member
of The Alquist Advantage Network
of AMSOIL Dealers
AMSOIL Products for Jr. Dragsters,
Kart Racing, and Pocket Bikes
Synthetic Motor Oils, Chain Lube, Greases
For 4-stroke Jr. Dragsters and Karts:
0W-30
 |
 |
AMSOIL Series 2000 Synthetic 0W-30 Motor Oil (TSO)
- AMSOIL Series 2000 Synthetic 0W-30 Motor Oil optimizes efficiency and power without
the sacrifice in wear protection that comes with many fuel-efficient, low-viscosity oils.
Testing shows AMSOIL Series 2000 Synthetic 0W-30 Motor Oil dramatically outperforms popular conventional and
synthetic motor oils of much higher viscosity in wear protection (see chart).
AMSOIL Series 2000 Synthetic 0W-30 Motor Oil meets or exceeds the engine protection requirements of all domestic
and foreign gasoline and diesel engines specifying the following: API SL/CF, SJ, SH; ILSAC GF-2, GF-3; ACEA A1/B1, A2/B2, A3/B3;
Chrysler MS-6395M; Ford WSS-M2C-913A/B; GM 4718M, 6094M; VW 502.00 (HTHS is 3.4); DaimlerChrysler 229.5, 229.3; JASO VTW
AMSOIL Series 2000 Synthetic 0W-30 Motor Oil efficiently transfers energy from the engine to the drivetrain. Its
low coefficient of friction inhibits the energy loss to "drag" common to high viscosity oils. Motorists seeking
the ultimate in fuel efficiency may use AMSOIL Series 2000 Synthetic 0W-30 Motor Oil in place of 5W-30 or 10W-30
motor oils.
In high performance and racing engines: drain oil according to the findings of used oil analysis.
For 2-stroke Karts and Pocket Bikes:
 |
DOMINATOR™ Synthetic 2-Cycle Racing Oil (TDR)
- DOMINATOR™, an AMSOIL exclusive formulation, lubricates and protects high performance two-cycle motors, both on
and off the track. High performance motors, particularly those that are modified, operate hotter and at higher
RPMs than recreational motors, and they need good oil for peak performance. DOMINATOR is engineered for racing.
It has the right film strength and clean burning properties for "on the edge" operation. DOMINATOR™ meets or
exceeds the engine protection requirements of all specifying the following: JASO FC, API TC
DOMINATOR™ is recommended for use in high performance stock or modified two-cycle motors, including air or liquid
cooled snowmobiles, personal watercraft, motorcycles (Moto X), ATVs, and go-karts. Good for use with coated or
non-coated pistons, high-octane racing fuels and exhaust power valves. Compatible with most other two-cycle oils,
however, mixing oils should be minimized.
- Provides excellent film
strength for high heat, high RPM motors
- Reduces friction for
maximum power
- Recommended for use
with coated or non-coated racing pistons
- Recommended for use
with exhaust power valves
- Recommended for use
with high octane racing gas
- Burns clean to control
ring sticking and plug fouling
- Provides excellent protection
at 50:1 pre-mix or in injection system
Use at 50:1 pre-mix ratios (2.6 oz. oil per U.S. gallon of gas) or as injection oil where JASO FC or API TC oils
are specified. Not suitable for use with alcohol or nitro-methane fuels.
AMSOIL Series 2000 Chaincase Oil (TCC) AMSOIL Series 2000 Chaincase Oil provides superior
protection and performance for enclosed chains. Ideal for snowmobiles, ATVs and general equipment. Extreme
pressure additives provide extra wear protection. Extends chain life repels water, and inhibits rust, oxidation
and foam. Superior low temperature starting, performance and protection.
 |
 |
AMSOIL Synthetic Multi-Purpose Grease, NLGI #2 (GLC) reduces friction and wear in high-speed,
high-temperature components such as automotive wheel bearings and electric motors. Keeps components running clean
and trouble free for outstanding performance and long-life. NLGI #0 and NLGI #1 greases have better mobility and
are preferred for cold temperature and automatic pump systems. NLGI #2 is the primary wheel bearing recommendation.
AMSOIL Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB (GRG) Ultimate protection for hard-driven, high
performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high- and
low-temperature performance. Outperforms other conventional and synthetic greases.
 |
AMSOIL MP Heavy Duty Metal Protector (AMH) A heavy duty spray lubricant fortified with special rust and corrosion
inhibitors. Penetrates and adheres to metal surfaces, leaving a long lasting protective coating. Apply MPHD to any
metal surface that requires a heavy duty lubricant or is exposed to the damaging effects of salt, moisture or
chemical corrosion. Works as an undercoat, leaving a wax-like film. Recommended for motorcycle chains. Won't "sling"
off. Dry to the touch. Doesn't attract dust. It is ideal for hinges, wire ropes and springs, nuts and bolts,
motorcycle or bicycle chains, and for undercoating car doors, wheel wells, rocker panels, seams and other metal surfaces exposed to water, dirt or road salt.
Copyright ©2005 AMSOIL INC. and Joe St. John